Panasonic FP-M Hardware Manual page 176

7-7. FP-M I/O Link Board (MEWNET-F)
Operation monitor LEDs
LED
POWER ON:
OFF:
COM. Flashing:
ON:
Flashing
slowly:
OFF:
ALARM Flashing:
ON:
OFF:
Operation mode selector setting
Selector
number
1 and 2 Terminal station setting
3 Output operation condition
during a communication error
4 I/O points setting
168
Power is supplied.
Power is not supplied.
Normal communication status (Flashes in approx. 0.2 s intervals)
Not communicating
A communication error occurred at the slave station. The normal slave station
continues I/O control operation. (Flashes in approx. 1 s intervals)
Abnormal condition
Station number setting error
FP-M I/O link board (MEWNET-F) error
Normal
Function
Not terminal station
Terminal station
Stop
ON state (maintain its output condition)
64 points
32 input points:
32 output points:
32 points
16 input points:
16 output points:
Description
Description
X110 to X12F
Y110 to Y12F
X110 to X11F
Y110 to Y11F
Selector position
1 2 3 4
OFF OFF
ON ON
OFF
ON
OFF
ON