I/O Allocation Of Fp-M Transmitter Master Board; I/O Allocation Of Fp-M I/O Link Board - Panasonic FP-M Hardware Manual

8-3. I/O Allocation Table

5. I/O Allocation of FP-M Transmitter Master Board

• The I/O addresses for the transmitter master board are set according to the operation mode selector as follows.
Board type
FP-M
transmitter
master board
Notes:
• When connecting the FP-M transmitter master board, be sure not to overlap I/O addresses.
• Switch positions 1 to 5 of the operation mode selector are not ignored.

6. I/O Allocation of FP-M I/O Link Board

• The I/O addresses for the FP-M I/O link board are set according to the operation mode selector as follows.
Board type
FP-M I/O
link board
Notes:
• When connecting the FP-M I/O link board, be sure not to overlap I/O addresses.
• Switch positions 1 to 3 of the operation mode selector are not ignored.
184
Operation mode I/O point
selector position
6 7 8
OFF — — 32 inputs
32 outputs
ON ON ON 48 inputs
32 outputs
ON ON OFF 24 inputs
16 outputs
ON OFF ON 48 inputs
32 outputs
ON OFF OFF 24 inputs
16 outputs
Operation mode I/O point
selector position
4
OFF 64 points
32 inputs
32 outputs
ON 32 points
16 inputs
16 outputs
I/O allocation
X110 to X12F
Y110 to Y12F
X70 to X87, X90 to X107
Y70 to Y7F, Y90 to Y9F
X70 to X87
Y70 to Y7F
X30 to X47, X50 to X67
Y30 to Y3F, Y50 to Y5F
X30 to X47
Y30 to Y3F
I/O allocation
X110 to X12F
Y110 to Y12F
X110 to X11F
Y110 to Y11F