Expansion Boards; E20R Type - Panasonic FP-M Hardware Manual

2-2. Parts Terminology

2. Expansion Boards

1) E20R type

4 Output
indicators
(LED)
1 Expansion power supply connector:
2 Input terminal (15-pin):
3 Output terminal (12-pin):
4 Output indicators (LED):
5 Expansion connector:
6 I/O address setting switch:
7 Input indicators (LED):
28
5







3 Output terminal
5 Expansion connector
6 I/O address setting switch
1
2 Input terminal
Connected to the control board, the power is supplied to the
expansion board through this.
Connects the input field devices (e.g., limit switch).
This terminal block is removable.
Connects the output field devices (e.g., solenoid).
This terminal block is removable.
Indicates the output ON/OFF states.
Connects the control board with internal circuit.
The I/O addresses for the expansion boards are set using this switch.
Refer to page 39, "3-2. I/O Allocation of Expansion Boards", for
details.
Indicates the input ON/OFF states.
7 Input indicators
(LED)
1 Expansion power
supply connector