Analog I/O Board; Specifications; General; Performance - Panasonic FP-M Hardware Manual

7-1. Analog I/O Board

7-1. Analog I/O Board

Input and output of analog data (voltage and current) is possible by expanding the FP-M control board with an analog
I/O board.

1. Specifications

1) General

Item
Ambient temperature
Ambient humidity
Storage temperature
Vibration resistance
Shock resistance
Noise immunity
Note:
• When using in ambient temperature of 45 ˚C to 50 ˚C, be sure to make the number of ON points on the
upper expansion board 50 % or less.

2) Performance

Item
Analog Number of input channels
input Input range

specifications

Resolution
Overall accuracy
Response time
Input impedance
Absolute input range
Digital converted data
Analog Number of output channels
output Output range
specifications Resolution
Overall accuracy
Response time
Output impedance
Max. output current
Allowable load resistance
Digital data
Insulation method
128
0 ˚C to +50 ˚C (32 ˚F to +122 ˚F) (See note.)
30 % to 80 % RH (non-condensing)
–20 ˚C to +70 ˚C (– 4 ˚F to +158 ˚F )
10 Hz to 55 Hz, 1 cycle/min: double amplitude of 0.75 mm (0.030 in.), 10 min on 3 axes
Shock of 98 m/s 2 or more, 4 times on 3 axes
800 Vp-p (based on in-house measurements)
4 channels
0 to 5 V, 0 to 10 V, and 0 to 20 mA
1/256
±3LSB (at 25 ˚C/77 ˚F),
±5LSB (at 0 ˚C to 50 ˚C/32 ˚F to 122 ˚F)
2.5 ms/channel
1 MΩ or more (for 0 to 5 V and 0 to 10 V range)
250 Ω (for 0 to 20 mA range)
+15 V (at 0 to 5 V and 0 to 10 V range)
+30 mA (at 0 to 20 mA range)
K0 to K255
1 channel
0 to 5 V, 0 to 10 V, and 0 to 20 mA
1/256
±1.0 % of full scale (at 25 ˚C/77 ˚F),
±2.0 % of full scale (at 0 ˚C to 50 ˚C /32 ˚F to 122 ˚F)
2.5 ms/channel
0.5 Ω or less (for 0 to 5 V and 0 to 10 V output range)
20 mA (for 0 to 5 V and 0 to 10 V output range)
0 to 500 Ω (for 0 to 20 mA range)
K0 to K255
Optical coupler (not insulated between channels)
Description
Description