Backing Up The Project; Transmission From The Execution Memory Ram To The Backup Memory Rom2 - Panasonic FP7 Series User Manual

5.3 Backing Up the Project

5.3.1 Transmission from the Execution Memory RAM to the Backup Memory
ROM2
In normal operation, you can save your project in the execution memory RAM/ROM1, and use
the saved data. In order to prepare for unplanned rewriting, backup memory ROM2 is also
installed.
When the mode switch is set to PROG., you can back up the execution project that is saved in
RAM into ROM2.
 Switch setting conditions
Switch
Mode switch
Card operation switch
 Procedure
1. Set the mode switch to PROG.
2. By executing "Online" → "Project Backup" using FPWIN GR7, the project is
transmitted from the execution memory RAM to the backup memory ROM2.
Setting
PROG.
ROM
5.3 Backing Up the Project
5-7