Case Type - Panasonic FP-M Hardware Manual

2. Case Type

• The procedure for assembling cases is as follows.
Example: 1 control board and 4 expansion boards
Screws (20 mm)
Connector board
Control board
AFB8803 spacers
Expansion board
AFB8803 spacers
Expansion board
AFB8803 spacers
Expansion board
AFB8803 spacers
Skirt case
AFB88032 spacers
Mounting plate
(including 4 screws)
Spacers
Shape Length
18 mm
8 mm
Procedure
1. Using the four screws of the mounting plate, attach the mounting plate with AFB88032 spacers.
2. Assemble the expansion board using the skirt case and AFB8803 spacers.
3. Assemble the remaining expansion boards using the case for expansion board and AFB8803 spacers.
4. After connecting the connector board to the control board, attach the control board using the 20 mm and 8 mm screws.
Note that the C type control board is shipped with the connector board already attached.
5. Insert the backup battery in the backup battery holder as shown in the drawing.
6. Finally, mount the case for control board.
Notes:
• The lengths of the spacers for the board type and the case type are different, so be sure not to get them
confused.
• Do not touch the boards directly with your hands when handling. When it is necessary to touch the board,
first touch a grounded metal object to discharge any static electricity. Do not touch any electronic parts or
connectors directly.
Description
4 spacers attached to an expansion and control boards
4 spacers attached to a mounting plate
Case for
control board
Screws (8 mm)
AFB8803 spacers
Case for
expansion board
AFB8803 spacers
Case for
expansion board
AFB8803 spacers
Case for
expansion board
AFB8803 spacers
Expansion board
AFB88032 spacers
4-1. Stacking the Boards
Backup
battery
Backup battery
holder
Part number
AFB8803
AFB88032
43