D/A Converter Board; Specifications; General; Performance - Panasonic FP-M Hardware Manual

7-3. D/A Converter Board

7-3. D/A Converter Board

Output of analog data (voltage and current) is possible by expanding the FP-M control board with an intelligent
board for analog data output.

1. Specifications

1) General

Item
Ambient temperature
Ambient humidity
Storage temperature
Vibration resistance
Shock resistance
Noise immunity
Note:
• When using in ambient temperature of 45 ˚C to 50 ˚C, be sure to make the number of ON points on the
upper expansion board 50 % or less.

2) Performance

Item
Number of output channels
Output range
Resolution
Overall accuracy
Response time
Output impedance
Max. output current
Allowable load resistance
Digital data
Insulation method
138
0 ˚C to +50 ˚C (32 ˚F to +122 ˚F) (See note.)
30 % to 80 % RH (non-condensing)
–20 ˚C to +70 ˚C (– 4 ˚F to +158 ˚F )
10 Hz to 55 Hz, 1 cycle/min: double amplitude of 0.75 mm (0.030 in.), 10 min on 3 axes
Shock of 98 m/s 2 or more, 4 times on 3 axes
800 Vp-p (based on in-house measurements)
2 channels
0 to 5 V, 0 to 10 V, and 0 to 20 mA
1/1000
±1.0 % of full scale (at 25 ˚C/77 ˚F),
±2.0 % of full scale (at 0 ˚C to 50 ˚C/32 ˚F to 122 ˚F)
2.5 ms/channel
0.5 Ω or less (for 0 to 5 V and 0 to 10 V range)
20 mA (for 0 to 5 V and 0 to 10 V range)
0 to 500 Ω (for 0 to 20 mA range)
K0 to K1000
Optical coupler (not insulated between channels)
Description
Description