Parts Terminology - Panasonic FP-M Hardware Manual

3. Parts Terminology

4 Expansion connector
JP4
JP3
B
A
3 Input terminal
(for channel 0 to 2)
1 Expansion power supply connector:
2 Input terminal (8-pin):
3 Input terminal (12-pin):
4 Expansion connector:
5 Board number selector:
(See following page.)
6 Analog range selectors:
(See following page.)
5 Board number selector
6 Analog range selectors
JP5
B
A
JP2
B
B A
A
2 Input terminal
(for channel 3)
Supplies power to the A/D converter board using the expansion
power supply cable.
Connect the input field devices (e.g., limit switch) for channel 3.
Connect the input field devices (e.g., limit switch) for channels 0,
1 and 2.
Connects the control board with the internal circuit.
Sets the special data register for storing analog input data by
selecting the board number.
The analog input ranges are selectable with jumper pins on the
board.
JP1
B
A
1 Expansion power
supply connector
7-2. A/D Converter Board
135