Initialize Host-Based Port(S); Reauthenticate Port-Based Port(S) - D-Link DGS-3000 Series Reference Manual

Parameter
From Port / To Port
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings window
before initializing ports.

Initialize Host-based Port(s)

This window is used to display the current initialized host-based ports.
To view this window, click Security > 802.1X > Initialize Host-based Port(s) as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
MAC Address
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings window
before initializing ports.

Reauthenticate Port-based Port(s)

This window is used to display the current status of the re-authenticated port-based port(s).
To view this window, click Security > 802.1X > Reauthenticate Port-based Port(s) as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the 802.1X Global Settings window
before re-authenticating ports.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Description
Select a range of ports to be displayed.
Figure 8-19 Initialize Host-based Port(s) window
Description
Select a range of ports to be displayed.
Select and enter the authenticated MAC address of the client connected to the
corresponding port.
Figure 8-20 Reauthenticate Port-based Port(s) window
Description
Select a range of ports to be displayed.
218