D-Link DGS-3000 Series Reference Manual page 296

The fields that can be configured are described below:
Parameter
Interface Name
DHCPv6 Relay State
DHCPv6 Server
Address
Click the Apply button to accept the changes made.
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
After clicking the View Detail
Click the <<Back button to return to the previous window.
Click the Delete button to remove the specific entry.
DHCPv6 Relay Option 37 Settings
This window is used to configure the processing of Option 37 for the DHCPv6 relay function. When the DHCPv6 relay
Option 37 is enabled, the DHCP packet will be inserted with the Option 37 field before being relayed to server. The
DHCP packet will be processed based on the behavior defined in the check and remote ID type setting. When the
state is disabled, the DHCP packet will be relayed directly to server without further checks and inserted with the
Option 37.
To view this window, click Network Application > DHCP > DHCPv6 Relay > DHCPv6 Relay Option 37 Settings as
shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 9-17 DHCPv6 Relay Settings window
Description
Enter the name of the IPv6 interface. Select the All check box to select all IPv6
interfaces.
Use the drop-down menu to enable or disable the DHCPv6 relay state of the interface.
Enter the DHCPv6 server IPv6 address.
link, the following page will appear:
Figure 9-18 DHCPv6 Relay Settings - View Detail window
287