Ssh - D-Link DGS-3000 Series Reference Manual

Parameter
RSA_WITH_RC4_128_MD5
RSA_WITH_3DES_EDE_CBC_SHA
DHE_DSS_WITH_3DES_EDE_CBC_SHA
RSA_EXPORT_WITH_RC4_40_MD5
RSA_WITH_AES_128_CBC_SHA
RSA_WITH_AES_256_CBC_SHA
RSA_WITH_AES_128_CBC_SHA256
RSA_WITH_AES_256_CBC_SHA256
DHE_DSS_WITH_AES_256_CBC_SHA
DHE_RSA_WITH_AES_256_CBC_SHA
Click the Apply button to accept the changes made.
To download SSL certificates, configure the parameters in the SSL Certificate Download section described below.
Parameter
Server IP Address
Certificate File Name
Key File Name
Click the Download button to download the SSL certificate based on the information entered.
NOTE: Certain implementations concerning the function and configuration of SSL are not available on
the web-based management of this Switch and need to be configured using the command line interface.
NOTE: Enabling the SSL command will disable the web-based switch management. To log on to the
Switch again, the header of the URL must begin with https://. Entering anything else into the address field
of the web browser will result in an error and no authentication will be granted.

SSH

SSH is an abbreviation of Secure Shell, which is a program allowing secure remote login and secure network services
over an insecure network. It allows a secure login to remote host computers, a safe method of executing commands
on a remote end node, and will provide secure encrypted and authenticated communication between two non-trusted
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Description
This cipher suite combines the RSA key exchange, stream cipher
RC4 encryption with 128-bit keys and the MD5 Hash Algorithm. Use
the radio buttons to enable or disable this cipher suite. The default is
Disabled.
This cipher suite combines the RSA key exchange, CBC Block
Cipher 3DES_EDE encryption and the SHA Hash Algorithm. Use the
radio buttons to enable or disable this cipher suite. The default is
Enabled.
This cipher suite combines the DSA Diffie Hellman key exchange,
CBC Block Cipher 3DES_EDE encryption and SHA Hash Algorithm.
Use the radio buttons to enable or disable this cipher suite. The
default is Enabled.
This cipher suite combines the RSA_EXPORT key exchange with
RC4 40 bits encryption and MD5 hash. Use the radio buttons to
enable or disable this cipher suite. The default is Disabled.
This cipher suite combines the RSA key exchange with AES 128 bits
encryption and SHA hash. The default is Enabled.
This cipher suite combines the RSA key exchange with AES 256 bits
encryption and SHA hash. The default is Enabled.
This cipher suite combines RSA key exchange with AES 128 bits
encryption and SHA256 hash. The default is Enabled.
This cipher suite combines the RSA key exchange with AES 256 bits
encryption and SHA256 hash. The default is Enabled.
This cipher suite combines the DHE-DSS key exchange with AES
256 bits encryption and SHA hash. The default is Enabled.
This cipher suite combines the DHE-RSA key exchange with AES
256 bits encryption and SHA hash. The default is Enabled.
Description
Enter the IPv4 address of the TFTP server where the key file and certificate files are
located.
Enter the path and the filename of the certificate file to download.
Enter the path and the filename of the key file to download.
266