D-Link DGS-3000 Series Reference Manual page 137

The fields that can be configured are described below:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Delete button to remove the specific entry.
MLD Snooping Multicast VLAN Settings
This window is used to add, delete, or configure the MLD snooping multicast VLAN in this window.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > MLD Snooping
Multicast VLAN Settings, as shown below:
The fields that can be configured are described below:
Parameter
MLD Multicast VLAN
State
MLD Multicast VLAN
Forward Unmatched
VLAN Name
VID (2-4094)
Remap Priority
Replace Priority
Click the Apply button to accept the changes made for each individual section.
Click the Add button to add a new entry based on the information entered.
Click the Profile List link to configure the MLD Snooping Multicast VLAN Settings for the specific entry.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-74 Multicast Group Profile Multicast Address Settings window
Description
Enter the multicast address list.
Figure 4-75 MLD Snooping Multicast VLAN Settings window
Description
Click to enable or disable the MLD multicast VLAN state.
Click to enable or disable the MLD multicast VLAN Forward Unmatched state.
Enter the VLAN name used.
Enter the VID value used.
The user can select this option to enable the Remap Priority feature.
Specify the remap priority (0 to 7) to be associated with the data traffic to be forwarded
on the multicast VLAN. If None is specified, the packet's original priority will be used.
The default setting is None.
Tick the check box to specify that the packet's priority will be changed by the switch,
based on the remap priority. This flag will only take effect when the remap priority is set.
128