Fdb; Static Fdb Settings - D-Link DGS-3000 Series Reference Manual

Click the Apply button to accept the changes made.

FDB

Static FDB Settings

Unicast Static FDB Settings
Users can set up static unicast forwarding on the Switch.
To view the following window, click L2 Features > FDB > Static FDB Settings > Unicast Static FDB Settings as
shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VLAN List
MAC Address
Port / Drop
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast Static FDB Settings
Users can set up static multicast forwarding on the Switch.
To view the following window, click L2 Features > FDB > Static FDB Settings > Multicast Static FDB Settings as
shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
frames. In order to allow the linked port group to negotiate adjustments and make changes
dynamically, one end of the connection must have "active" LACP ports (see above).
Figure 4-37 Unicast Static FDB Settings window
Description
Click the radio button and enter the VLAN name of the VLAN on which the associated
unicast MAC address resides.
Click the radio button and enter a list of VLAN on which the associated unicast MAC address
resides.
The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Allows the selection of the port number on which the MAC address entered above resides
This option could also drop the MAC address from the unicast static FDB. When selecting
Port, enter the port number in the field.
103