D-Link DGS-3000 Series Reference Manual page 87

Port Display all ports of the Switch for the configuration option.
Tagged Specify the port as 802.1Q tagging. Clicking the radio button will designate the port as tagged.
Click the All button to select all ports.
Untagged Specify the port as 802.1Q untagged. Clicking the radio button will designate the port as
untagged. Click the All button to select all ports.
Forbidden Click the radio button to specify the port as not being a member of the VLAN and that the port
is forbidden from becoming a member of the VLAN dynamically. Click the All button to select
all ports.
Not Member Click the radio button to allow an individual port to be specified as a non-VLAN member. Click
the All button to select all ports.
Click the Apply button to accept the changes made.
To search for a VLAN, click the Find VLAN tab. A new tab will appear as shown below:
Enter the VLAN ID number in the field offered and then click the Find button. You will be redirected to the VLAN List
tab.
To create, delete and configure a VLAN Batch entry click the VLAN Batch Settings tab as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-6 802.1Q VLAN Settings – Find VLAN Tab window
Figure 4-7 802.1Q VLAN Settings – VLAN Batch Settings Tab window
78