D-Link DGS-3000 Series Reference Manual page 152

The fields that can be configured are described below:
Parameter
From Port / To Port
Dot1 TLV PVID
Dot1 TLV Protocol VLAN
Dot1 TLV VLAN
Dot1 TLV Protocol
Identity
Click the Apply button to accept the changes made.
LLDP Dot3 TLVs Settings
This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 organizational
specific TLV data type from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Dot3 TLVs Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-96 LLDP Dot1 TLVs Settings window
Description
Use the drop-down menu to select the port range to use for this configuration.
Use the drop-down menu to enable or disable and configure the Dot1 TLV PVID
option.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
VLAN option. After enabling this option, use the next drop-down menu to select VLAN
Name, VID List, or All. After selecting this, enter either the VLAN name or a list of
VLAN ID in the field provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV VLAN
option. After enabling this option, use the next drop-down menu to select VLAN
Name, VID List, or All. After selecting this, enter either the VLAN name or a list of
VLAN ID in the field provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
Identity option. After enabling this option, use the next drop-down menu to select
EAPOL, LACP, GVRP, STP, or All.
143