D-Link DGS-3000 Series Reference Manual page 153

The fields that can be configured are described below:
Parameter
From Port / To Port
MAC / PHY
Configuration Status
Link Aggregation
Maximum Frame Size
Power Via MDI
Click the Apply button to accept the changes made.
LLDP Statistics System
The LLDP Statistics System page allows you an overview of the neighbor detection activity, LLDP Statistics and the
settings for individual ports on the Switch.
To view the following window, click L2 Features > LLDP > LLDP > LLDP Statistics System as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-97 LLDP Dot3 TLVs Settings window
Description
Use the drop-down menu to select the port range to use for this configuration.
This TLV optional data type indicates that the LLDP agent should transmit the
MAC/PHY configuration/status TLV. This indicates it is possible for two ends of an
IEEE 802.3 link to be configured with different duplex and/or speed settings and still
establish some limited network connectivity. More precisely, the information includes
whether the port supports the auto-negotiation function, whether the function is
enabled, whether it has auto-negotiated advertised capability, and what is the
operational MAU type. The default state is Disabled.
The Link Aggregation option indicates that LLDP agents should transmit 'Link
Aggregation TLV'. This indicates the current link aggregation status of IEEE 802.3
MACs. More precisely, the information should include whether the port is capable of
doing link aggregation, whether the port is aggregated in an aggregated link, and
what is the aggregated port ID. The default state is Disabled.
The Maximum Frame Size indicates that LLDP agent should transmit 'Maximum-
frame-size TLV. The default state is Disabled.
Use the drop down menu to enable or disable power via MDI. The Power Via MDI
TLV allows network management to advertise and discover the MDI power support
capabilities of the sending IEEE 802.3 LAN station.
144