Nd Snooping - D-Link DGS-3000 Series Reference Manual

Ports
Click the Find button to locate a specific entry based on the port number selected.
Click the Clear button to clear all the information entered in the fields.
Click the View All button to display all the existing entries.

ND Snooping

ND Snooping Maximum Entry Settings
This window is used to configure the maximum ND Snooping entry for ports on this page.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > ND Snooping > ND Snooping Maximum
Entry Settings as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Maximum Entry (1-50)
Click the Apply button to accept the changes made.
ND Snooping Entry
This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > ND Snooping > ND Snooping Entry as
shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Specify the port number. Select the All Ports check box to clear entries for all ports.
Select the IPv4 check box to select IPv4 DHCP snooping learned entries. Select the
IPv6 check box to select IPv6 DHCP snooping learned entries.
Figure 8-32 ND Snooping Maximum Entry Settings window
Description
Use the drop-down menus to select a range of ports that require a restriction on the
maximum number of entries that can be learned with ND snooping.
Enter the maximum entry value. Select the No Limit check box to have unlimited
maximum number of the learned entries.
229