D-Link DGS-3000 Series Reference Manual page 311

Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Add MA button to add a maintenance association (MA).
NOTE: The MD Name value should be less than 22 characters.
After clicking the Add MA button, the following window will appear:
The fields that can be configured are described below:
Parameter
MA
MA Index
VID
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the MIP Port Table button to view the CFM MIP Table.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Click the Add MEP button to add a Maintenance End Point entry.
After clicking the MIP Port Table button, the following window will appear:
Click the <<Back button to return to the previous page.
After click in the Edit button the following window appears:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 10-2 CFM MA Settings Window
Description
Enter the maintenance association name.
Enter the maintenance association index.
VLAN Identifier. Different MA must be associated with different VLANs.
Figure 10-3 CFM MIP Port Table Window
302