D-Link DGS-3000 Series Reference Manual page 289

DHCP Relay Option 60 Server Settings
This window is used to configure the DHCP relay Option 60 server parameters.
To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Server Settings
as shown below:
The fields that can be configured are described below:
Parameter
Server IP Address
Mode
Click the Add button to add a new entry based on the information entered.
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Click the Delete All button to remove all the entries listed.
NOTE: When there is no matching server found for the packet based on Option 60, the relay servers will
be determined by the default relay server setting.
DHCP Relay Option 60 Settings
This decides whether the DHCP Relay will process the DHCP Option 60.
To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Option 60 Settings as
shown below:
The fields that can be configured are described below:
Parameter
String
Server IP Address
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 9-6 DHCP Relay Option 60 Server Settings window
Description
Enter the DHCP Relay Option 60 Server Relay IP Address.
Use the drop-down menu to select the DHCP Relay Option 60 Server mode.
Figure 9-7 DHCP Relay Option 60 Settings window
Description
Enter the DHCP Relay Option 60 String value. Different strings can be specified for the
same relay server, and the same string can be specified with multiple relay servers. The
system will relay the packet to all the matching servers.
Enter the DHCP Relay Option 60 Server IP address.
280