D-Link DGS-3000 Series Reference Manual page 204

After clicking the Add CPU ACL Profile button, the following window will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-5)
Select ACL Type
IPv6 Class
IPv6 Flow Label
IPv6 Source Mask
IPv6 Destination
Mask
Click the Select button to select a CPU ACL type.
Click the Create button to create a profile.
Click the <<Back button to discard the changes made and return to the previous page.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 7-34 Add CPU ACL Profile (IPv6 ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to5.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet
content ACL. This will change the menu according to the requirements for the type of
profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header.
Select IPv4 to instruct the Switch to examine the IPv4 address in each frame's header.
Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header.
Select Packet Content ACL to specify a mask to hide the content of the packet header.
Checking this field will instruct the Switch to examine the class field of the IPv6 header.
This class field is a part of the packet header that is similar to the Type of Service (ToS)
or Precedence bits field in IPv4.
Checking this field will instruct the Switch to examine the flow label field of the IPv6
header. This flow label field is used by a source to label sequences of packets such as
non-default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by checking the
corresponding box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by checking
the corresponding box and entering the IP address mask.
195