Add An Ethernet Acl Profile - D-Link DGS-3000 Series Reference Manual

Click the Add/View Rules button to view or add ACL rules within the specified profile ID.
For profile IDs 1 and 2, click the Delete button to remove all the settings within these profiles. For profile ID 3 or higher,
click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
There are four Add Access Profile windows;
•
one for Ethernet (or MAC address-based) profile configuration,
•
one for IPv6 address-based profile configuration,
•
one for IPv4 address-based profile configuration, and
•
one for packet content profile configuration.

Add an Ethernet ACL Profile

The window shown below is the Add ACL Profile window for Ethernet. To use specific filtering masks in this ACL
profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the Add ACL Profile button, the following window will appear:
The fields that can be configured are described below:
Parameter
Profile ID (1-512)
Profile Name
Select ACL Type
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 7-3 Add ACL Profile window (Ethernet ACL)
Description
Enter a unique identifier number for this profile set. This value can be set from 1 to 512.
Enter a profile name for the profile created.
Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet
content. This will change the window according to the requirements for the type of profile.
Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet
header.
170