Nlb Fdb Settings - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Port
Click the Find button to locate a specific entry based on the information entered.
LLDP-MED Remote Port Information
This window displays the information learned from the neighbor parameters.
To view the following window, click L2 Features > LLDP > LLDP-MED > LLDP-MED Remote Port Information as
shown below:
The fields that can be configured are described below:
Parameter
Port
Click the Find button to locate a specific entry based on the information entered.
To view the normal LLDP Remote Port information page per port, click the Show Normal button.
After clicking the Show Normal button, the following window will appear:
Click the <<Back button to return to the previous page.

NLB FDB Settings

The Switch supports Network Load Balancing (NLB). This is a MAC forwarding control for supporting the Microsoft
server load balancing application where multiple servers can share the same IP address and MAC address. The
requests from clients will be forwarded to all servers, but will only be processed by one of them. In multicast mode, the
client uses a multicast MAC address as the destination MAC to reach the server. Regardless of the mode, the
destination MAC is the shared MAC. The server uses its own MAC address (rather than the shared MAC) as the
source MAC address of the reply packet. The NLB multicast FDB entry will be mutually exclusive with the L2 multicast
entry.
To view this window, click L2 Features > NLB FDB Settings, as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Description
Use the drop-down menu to select a port.
Figure 4-107 LLDP-MED Remote Port Information window
Description
Use the drop-down menu to select a port.
Figure 4-108 LLDP-MED Remote Port Information – Show Normal window
149