D-Link DGS-3000 Series Reference Manual page 294

To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Manual Binding as shown
below:
The fields that can be configured are described below:
Parameter
Pool Name
IP Address
Hardware Address
Type
Click the Add button to add a new entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Delete button to remove the specific entry.
DHCP Server Dynamic Binding
This window is used to delete the DHCP server dynamic binding table.
To view this window, click Network Application > DHCP > DHCP Server > DHCP Server Dynamic Binding as
shown below:
The fields that can be configured are described below:
Parameter
Pool Name
Click the Clear button to clear all the information entered in the fields.
Click the Clear All button to remove all the entries listed in the table.
DHCP Conflict IP
The DHCP server will use PING packet to determine whether an IP address is conflict with other host before binding
this IP. The IP address which has been identified conflict will be moved to the conflict IP database. The system will not
attempt to bind the IP address in the conflict IP database unless the user clears it from the conflict IP database.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 9-13 DHCP Server Manual Binding window
Description
Enter the DHCP Server Pool name.
IP address which will be assigned to specified client.
Enter the hardware address.
Either Ethernet or IEEE802 can be specified.
Figure 9-14 DHCP Server Dynamic Binding window
Description
Enter the DHCP Server Pool name.
285