®
xStack
To view this window, click Security > 802.1X > Authenticator Diagnostics as shown below:
The fields that can be configured are described below:
Parameter
Port
Click the Apply button to accept the changes made.
NOTE: The user must first globally enable Authentication Mode in the Error! Reference source not found.
window before initializing ports. Information in this window cannot be viewed before enabling the
authentication mode for either Port-based or MAC-based.
Initialize Port(s)
This window is used to initialize the 802.1X authentication state machine of ports and displays the current initialized
ports.
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
Figure 9-19 Authenticator Diagnostics - Port-based window
Figure 9-20 Authenticator Diagnostics - MAC-based window
Description
Use the drop-down menu to select a port to display.
299