802.1X Port Settings - D-Link DGS-3000 Series Reference Manual

To view this window, click Security > 802.1X > 802.1X Global Settings as shown below:
The fields that can be configured are described below:
Parameter
Authentication Mode
Authentication Protocol
Forward EAPOL PDU
Max Users (1-448)
RADIUS Authorization
Click the Apply button to accept the changes made.

802.1X Port Settings

Users can configure the 802.1X authenticator port settings.
To view this window, click Security > 802.1X > 802.1X Port Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 8-9 802.1X Global Settings window
Description
Choose the 802.1X authenticator mode: Disabled, Port-based, or MAC-based.
Choose the authenticator protocol: Local or RADIUS EAP.
This is a global setting to control the forwarding of EAPOL PDU. When 802.1X
functionality is disabled globally or for a port, and if 802.1X forward PDU is enabled
both globally and for the port, a received EAPOL packet on the port will be flooded in
the same VLAN to those ports for which 802.1X forward PDU is enabled and 802.1X
is disabled (globally or just for the port). The default state is disabled.
Specifies the maximum number of users. The limit on the maximum users is 448
users. Select the No Limit check box to use the maximum limit of 448 users.
This option is used to enable or disable acceptation of authorized configuration. When
the authorization is enabled for 802.1X's RADIUS, the authorized data assigned by
the RADIUS server will be accepted if the global authorization network is enabled.
210