D-Link DGS-3000 Series Reference Manual page 189

IPv6 Source Mask
IPv6 Destination
Mask
Click the Select button to select an ACL type.
Click the Create button to create a profile.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Show Details button, the following window will appear:
Click the Show All Profiles button to navigate back to the Access Profile List Page.
After clicking the Add/View Rules button, the following window will appear:
Click the Add Rule button to create a new ACL rule in this profile.
Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following window will appear:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
apply an ICMP code value.
The user may specify an IP address mask for the source IPv6 address by selecting the
corresponding check box and entering the IP address mask.
The user may specify an IP address mask for the destination IPv6 address by selecting the
corresponding check box and entering the IP address mask.
Figure 7-14 Access Profile Detail Information window (IPv6 ACL)
Figure 7-15 Access Rule List window (IPv6 ACL)
180