D-Link DGS-3000 Series Reference Manual page 130

Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
NOTE: The abbreviations used on this page are Static Router Port (S), Dynamic Router Port (D) and
Forbidden Router Port (F).
MLD Snooping Group
Users can view MLD Snooping Groups present on the Switch. MLD Snooping is an IPv6 function comparable to IGMP
Snooping for IPv4.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Group
as shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Port List
Group IPv6 Address
Data Driven
Click the Find button to locate a specific entry based on the information entered.
Click the Clear Data Driven button to delete the specific MLD snooping group which is learned by the Data Driven
feature of the specified VLAN.
Click the View All button to display all the existing entries.
Click the Clear All Data Driven button to delete all MLD snooping groups which is learned by the Data Driven feature
of specified VLANs.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-62 MLD Router Port window
Description
Enter a VLAN ID.
Figure 4-63 MLD Snooping Group window
Description
Click the radio button and enter the VLAN name of the multicast group.
Click the radio button and enter a VLAN list of the multicast group.
Specify the port number(s) used to find a multicast group.
Enter the group IPv6 address used here.
If Data Drive is selected, only data driven groups will be displayed.
121