D-Link DGS-3000 Series Reference Manual page 132

Click the Packet Statistics
After clicking the Packet Statistics
Click the Clear Counter button to clear all the information displayed in the fields.
Click the Refresh button to refresh the display table so that new information will appear.
Click the <<Back button to return to the previous page.
MLD Host Table
This window is used to search and view for MLD host.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Host Table as
shown below:
The fields that can be configured are described below:
Parameter
VLAN Name
VID List
Port List
Group Address
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
link to view the MLD Snooping Counter Settings for the specific entry.
link, the following window will appear:
Figure 4-66 Browse MLD Snooping Counter window
Figure 4-67 MLD Host Table window
Description
The VLAN Name of the multicast group.
The VLAN ID list of the multicast group.
Enter the port number(s) used to find MLD host.
Enter the IPv6 address for the multicast group.
123