D-Link DGS-3000 Series Reference Manual page 142

The fields that can be configured are described below:
Parameter
Profile ID (1-24)
Profile Name
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the Group List link to configure the multicast address group list settings for the specific entry.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Group List
The fields that can be configured or displayed are described below:
Parameter
Profile ID
Profile Name
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
IPv6 Limited Multicast Range Settings
Users can configure the ports and VLANs on the Switch that will be involved in the Limited IPv6 Multicast Range.
To view the following window, click L2 Features > Multicast Filtering > IPv6 Multicast Filtering > IPv6 Limited
Multicast Range Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-82 IPv4 Multicast Profile Settings window
Description
Enter a Profile ID between 1 and 24.
Enter a name for the IP Multicast Profile.
link, the following window will appear:
Figure 4-83 Multicast Address Group List Settings window
Description
Display the profile ID.
Display the profile name.
Enter the multicast address list here.
133