D-Link DGS-3000 Series Reference Manual page 134

After clicking the Group List
The fields that can be configured are described below:
Parameter
Multicast Address List
Click the Add button to add a new entry based on the information entered.
Click the <<Back button to discard the changes made and return to the previous page.
Click the Delete button to remove the corresponding entry.
IGMP Snooping Multicast VLAN Settings
On this page the user can configure the IGMP snooping multicast VLAN parameters.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Snooping
Multicast Group VLAN Settings as shown below:
The fields that can be configured are described below:
Parameter
IGMP Multicast VLAN
State
IGMP Multicast VLAN
Forward Unmatched
VLAN Name
VID (2-4094)
Remap Priority
Replace Priority
Click the Apply button to accept the changes made for each individual section.
Click the Add button to add a new entry based on the information entered.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
link, the following window will appear:
Figure 4-69 Multicast Group Profile Multicast Address Settings window
Description
Enter the multicast address list value.
Figure 4-70 IGMP Snooping Multicast VLAN Settings window
Description
Click to enable or disable the IGMP Multicast VLAN state.
Click to enable or disable the IGMP Multicast VLAN Forwarding Unmatched state.
Enter the VLAN Name used.
Enter the VID used.
0-7 – The remap priority value (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN.
None – If this is specified, the packet's original priority is used. The default setting is
None.
Specify that the packet's priority will be changed by the switch, based on the remap
priority. This flag will only take effect when the remap priority is set.
125