D-Link DGS-3000 Series Reference Manual page 202

Click the <<Back button to return to the previous page.
Click the Show Details button to view more information about the specific rule created.
Click the Delete Rules button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button, the following window will appear:
The fields that can be configured are described below:
Parameter
Access ID (1-100)
VLAN Name
VLAN ID
Source IP Address
Destination IP Address
DSCP
Protocol
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 7-32 Add CPU Access Rule (IPv4 ACL)
Description
Type in a unique identifier number for this access. This value can be set from 1 to 100.
Auto Assign – Select this check box will instruct the Switch to automatically assign an
Access ID for the rule being created.
Enter the VLAN name.
Enter the VLAN ID.
Enter the source IP address.
Enter the destination IP address.
Enter the DSCP value.
Selecting this option instructs the Switch to examine the protocol type value in each
frame's header. Then the user must specify what protocol(s) to include according to the
following guidelines:
Select this option to specify that the rule will be applied to ICMP traffic.
Type – Enter the ICMP packet type value.
Code – Enter the ICMP code value.
Select IGMP to instruct the Switch to examine the Internet Group Management
Protocol (IGMP) field in each frame's header.
Type – Enter the IGMP packet type value.
193