Upload Configuration To Ftp - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
TFTP Server IP
Destination File
Source File
Filter
Click Upload to initiate the upload.

Upload Configuration To FTP

This window is used to upload the configuration file from the Switch to a FTP Server.
The fields that can be configured are described below:
Parameter
FTP Server IP
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 12-13 Upload Configuration – TFTP window
Description
Enter the TFTP server IP address used.
IPv4 Click the radio button to enter the TFTP server IP address used.
IPv6 Click the radio button to enter the TFTP server IPv6 address used.
Domain Name Click the radio button to enter the TFTP server domain name used.
Enter the file name that will be stored in the TFTP server, e.g. config.cfg.
Enter the location of the Source File, e.g. C:\config.cfg.
Use the drop-down menu to include, begin or exclude a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Figure 12-14 Upload Configuration – FTP window
Description
Enter the FTP Server IP Address used.
345