Upload Firmware To Ftp; Upload Firmware To Http - D-Link DGS-3000 Series Reference Manual

Destination File
Source File
Click Upload to initiate the upload.

Upload Firmware To FTP

This window is used to upload firmware from the Switch to a FTP Server.
The fields that can be configured are described below:
Parameter
FTP Server IP
User Name
Password
TCP Port (1-65535)
Destination File
Source File
Click Upload to initiate the upload.

Upload Firmware To HTTP

This window is used to upload firmware from the Switch to a computer.
The fields that can be configured are described below:
Parameter
Source File
Click Upload to initiate the upload. Wait for the web browser to prompt where to save the file on the local PC.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Domain Name Click the radio button to enter the TFTP server domain name used.
Enter the file name that will be stored in the TFTP server, e.g. runtime.had.
Enter the location of the Source File, e.g. C:\runtime.had.
Figure 12-8 Upload Firmware – FTP window
Description
Enter the FTP Server IP Address used.
Enter the appropriate Username used.
Enter the appropriate Password used.
Enter the TCP Port number used.
Enter the file name that will be stored in the FTP server, e.g. runtime.had.
Enter the location of the Source File, e.g. C:\runtime.had.
Figure 12-9 Upload Firmware – HTTP window
Description
Enter the location and name of the Source File.
342