Gvrp - D-Link DGS-3000 Series Reference Manual

Port List
Search Port List
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the Protocol VLANs configured.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

GVRP

GVRP Global Settings
Users can determine whether the Switch will share its VLAN configuration information with other GARP VLAN
Registration Protocol (GVRP) enabled switches. In addition, Ingress Checking can be used to limit traffic by filtering
incoming packets whose PVID does not match the PVID of the port. Results can be seen in the table under the
configuration settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Global Settings as shown below:
The fields that can be configured are described below:
Parameter
GVRP State
Join Time (100-100000)
Leave Time (100-100000)
Leave All Time (100-
100000)
NNI BPDU Address
Click the Apply button to accept the changes made for each individual section.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
section of this manual.
Enter the port number or select the All Ports check box.
This function allows the user to search all previously configured port list settings and display
them on the lower half of the table. To search for a port list enter the port number you wish to
view and click Find. To display all previously configured port lists on the bottom half of the
screen click the Show All button, to clear all previously configured lists click the Delete All
button.
Figure 4-10 GVRP Global Settings window
Description
Click the radio buttons to enable or disable the GVRP State.
Enter the Join Time value in milliseconds.
Enter the Leave Time value in milliseconds.
Enter the Leave All Time value in milliseconds.
Used to determine the GVRP PDU protocol address for GVRP in service provide
site. It can use 802.1D GVRP address or 802.1ad service provider GVRP address.
81