Dns Resolver Dynamic Name Server Table; Dns Resolver Static Host Name Settings; Dns Resolver Dynamic Host Name Table - D-Link DGS-3000 Series Reference Manual

The fields that can be configured are described below:
Parameter
Server IP Address
Server IPv6 Address
Primary
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Name Server Table

This window displays the current DNS Resolver name servers.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Name Server Table as
shown below:

DNS Resolver Static Host Name Settings

The window is used to create the static host name entry of the switch.
To view this window, click Network Application > DNS Resolver > DNS Resolver Static Host Name Settings as
shown below:
The fields that can be configured are described below:
Parameter
Host Name
IP Address
IPv6 Address
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry.

DNS Resolver Dynamic Host Name Table

This window displays the current host name entries.
To view this window, click Network Application > DNS Resolver > DNS Resolver Dynamic Host Name Table as
shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Description
Enter a DNS Resolver name server IPv4 address here.
Enter a DNS Resolver name server IPv6 address here.
Select to set the name server as a primary name server.
Figure 9-26 DNS Resolver Dynamic Name Server Table window
Figure 9-27 DNS Resolver Static Host Name Settings window
Description
Enter the name of the host.
Click the radio button and enter the IPv4 address of the host here.
Click the radio button and enter the IPv6 address of the host here.
292