Sflow Global Settings; Sflow Analyzer Server Settings - D-Link DGS-3000 Series Reference Manual

sFlow Collector. The architecture and sampling techniques used in the sFlow monitoring system were designed for
providing continuous site-wide (and enterprise-wide) traffic monitoring of high speed switched and routed networks.

sFlow Global Settings

This window is used to enable or disable the sFlow feature.
To view the following window, click Monitoring > sFlow > sFlow Global Settings as shown below:
The fields that can be configured are described below:
Parameter
sFlow State
Click the Apply button to accept the changes made.

sFlow Analyzer Server Settings

The Switch can support 4 different Analyzer Servers at the same time and each sampler or poller can select a
collector to send the samples. We can send different samples from different samplers or pollers to different collectors.
To view the following window, click Monitoring > sFlow > sFlow Analyzer Server Settings as shown below:
The fields that can be configured are described below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 11-20 sFlow Global Settings window
Description
Click the radio button to enable or disable the sFlow feature.
Figure 11-21 sFlow Analyzer Server Settings window
333