D-Link DGS-3000 Series Reference Manual page 86

Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
To create a new 802.1Q VLAN or modify an existing 802.1Q VLAN, click the Add/Edit VLAN tab.
A new tab will appear as shown below to configure the port settings and to assign a unique name and number to the
new VLAN.
The fields that can be configured are described below:
Parameter Description
VID Allow the entry of a VLAN ID or displays the VLAN ID of an existing VLAN in the Add/Edit
VLAN tab. VLANs can be identified by either the VID or the VLAN name.
VLAN Name Allow the entry of a name for the new VLAN or for editing the VLAN name in the Add/Edit
VLAN tab.
Advertisement Enable this function to allow the Switch sending out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
Figure 4-4 802.1Q VLAN Settings –VLAN List Tab window
Figure 4-5 802.1Q VLAN Settings – Add/Edit VLAN Tab window
77