Error 30-936: Sorter Diverter #2 Failure - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 30-936: SORTER DIVERTER #2 Failure

8F2919
Page
255 of 326
Messages
Sorter: Internal Hardware
Failure
(Alarm sounds)
Description
This error occurs when the SORTER DIVERTER ARM does not move, as determined by
DIVERTER BIN 2 POSITION SENSOR (S21). The error is cleared when power is cycled on
the IMAGER.
Result of Error
The PRINTER is able to print, but films might not go to the correct BIN.
User Action
1 Restart the LASER IMAGER from the LOCAL PANEL.
2 If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1 De-energize then energize the LASER IMAGER.
LOCAL PANEL LOG
Sorter Diverter #2 failed to
operate
Status Messages and Error Codes
DICOM SEVERITY
ELEC DOWN 1-Alert