Error 20-919: Dre Image Render Not Complete - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 20-919: DRE Image Render Not Complete

8F2919
Page
121 of 326
Messages
Internal Image Data Render
Failed
(Alarm sounds)
Description
This error occurs when image data transfer between the DRE and the MCS does not
complete within a the expected time. The error is cleared when the IMAGER power is cycled.
Result of Error
The PRINTER cannot print films. The SPOOLER is able to receive and queue jobs, but new
films will not be initiated. Films downstream of the subsystem will be completed. All other
films will be reprinted.
User Action
1 Restart the LASER IMAGER from the LOCAL PANEL.
2 If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1 De-energize then energize the LASER IMAGER.
2 Install a new DATAPATH USB CABLE from the DRE to the OPTICS MODULE.
3 Install a new HARD DRIVE. See the ADJUSTMENTS AND REPLACEMENTS,
DRIVE - DRE
4 Install a new DRE. See the ADJUSTMENTS AND REPLACEMENTS,
ENGINE
LOCAL PANEL
AY.
(DRE).
LOG
Image render did not
complete
Status Messages and Error Codes
DICOM SEVERITY
ELEC DOWN 0-Fatal
HARD
DICOM RASTER