Error 26-321: Jam Exiting Accumulator - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 26-321: Jam Exiting ACCUMULATOR

8F2919
Page
172 of 326
Messages
Film Jam in Area 2
(Alarm sounds)
Description
This error occurs if the trailing edge is not detected at the FILM REGISTRATION
ACCUMULATOR FILM DETECT SENSOR (S9) after the film moves from the FILM
REGISTRATION ACCUMULATOR area. The error is cleared when the IMAGER DOORS are
opened then closed. Open is indicated by the I3 INTERLOCK (PROCESSOR and vertical
DOOR) open. Close is indicated by the I3 INTERLOCK closed.
Result of Error
The PRINTER cannot print films. The SPOOLER is able to receive and queue jobs but new
films will not be initiated. Films downstream of the subsystem will be completed. All other
films will be reprinted.
User Action
1 Open all DOORS on the IMAGER.
2 Remove any film jams in area 2.
Note
Use the FILM FEED KNOB in area 2 to move the film down to the "bottom" access area.
3 Close all DOORS.
4 If the error occurs again, call Service.
LOCAL PANEL LOG
Film Jam Exiting
Accumulator: Accumulator
Sensor S9 failed to detect
film trailing edge
Status Messages and Error Codes
DICOM SEVERITY
FILM JAM 1-Alert