Connecting/Disconnecting The Laptop Computer To/From The Imager - Kodak DryView 6800 Diagnostics Manual

Laser imager
Hide thumbs Also See for DryView 6800:
Table of Contents

Advertisement

DIAGNOSTICS
30JUL07

Connecting/Disconnecting the LAPTOP COMPUTER to/from the IMAGER

8F2919
Page
10 of 326
AIR INTAKE
DOOR
ELECTRONICS
FILTER
Caution
Dangerous Voltage
1
To connect:
a
b
c
Note
If you are printing films while the LAPTOP COMPUTER is connected to the IMAGER, you
can ensure that the IMAGER is "light tight" by routing the CROSSOVER CABLE as shown in
the picture below, then closing the AIR INTAKE DOOR.
2 SCREWS
Open the AIR INTAKE DOOR.
Remove:
3 NUTS
ELECTRONICS FILTER
Connect the LAPTOP COMPUTER to the RJ45 CONNECTOR on the DRE with a
CROSSOVER CABLE, TL-5568.
RJ45 CONNECTOR
AIR INTAKE DOOR
Using the Diagnostics

Advertisement

Table of Contents
loading

Table of Contents