Error 28-155: Bad Processor Nvram Parameters - Kodak DryView 6800 Diagnostics Manual
Laser imager
Hide thumbs
Also See for DryView 6800:
- User manual (64 pages) ,
- Quick start manual (1 page) ,
- Specifications (6 pages)
Table of Contents
Advertisement
DIAGNOSTICS
30JUL07
Error 28-155: Bad PROCESSOR NVRAM Parameters
8F2919
Page
220 of 326
Messages
Processor: Internal
Communications Failure
(Alarm sounds)
Description
This error occurs during start up when the setpoint or offset parameters read from NVRAM
are outside the allowable values. This error is caused by loading parameters that are not
correct into NVRAM or by an NVRAM error. The error is cleared when power is cycled on the
IMAGER.
Result of Error
The PRINTER cannot print films. The SPOOLER is able to receive and queue jobs but new
films will not be initiated. Films downstream of the subsystem will be completed. All other
films will be reprinted.
User Action
1
Restart the LASER IMAGER from the LOCAL PANEL.
2
If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1
De-energize then energize the LASER IMAGER.
LOCAL PANEL
LOG
Invalid Processor parameters
read from NVRAM
Status Messages and Error Codes
DICOM
SEVERITY
PROC DOWN
0-Fatal
Advertisement
Table of Contents
