Error 21-631, 22-631, Or 23-631: Dmin Not Met - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 21-631, 22-631, or 23-631: Dmin Not Met

8F2919
Page
163 of 326
Messages
xxxxx Supply: Film
Calibration Failure - Dmin
Outside Target
(Alarm sounds)
Description
Note
UPPER DRAWER (U) = 21. MIDDLE DRAWER (M) = 22, LOWER DRAWER (L) = 23.
This error occurs when the calibration sheet does not have a step with the necessary Dmin
value. Possible causes are expired film or incorrect PROCESSOR temperature. The error
clears when another calibration is asked for or when the SUPPLY DRAWER closes (as
indicated by the SUPPLY DRAWER INTERLOCK).
Result of Error
The system cannot print from this SUPPLY DRAWER. The SPOOLER is able to receive and
queue jobs, and print from any other available SUPPLY DRAWER.
User Action
1 Install a new FILM CARTRIDGE.
2 If the error occurs again, call Service.
Note
The operator can "ignore" calibration for this FILM CARTRIDGE.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
LOCAL PANEL LOG
xxxxx Supply: Calibration
failed - Dmin Not Met
Status Messages and Error Codes
DICOM SEVERITY
CALIBRATION 1-Alert
ERR