Error 33-311: Exposure Transport Entrance Feed Roller Failure272 - Kodak DryView 6800 Diagnostics Manual
Laser imager
Hide thumbs
Also See for DryView 6800:
- User manual (64 pages) ,
- Quick start manual (1 page) ,
- Specifications (6 pages)
Table of Contents
Advertisement
DIAGNOSTICS
30JUL07
Error 33-311: EXPOSURE TRANSPORT ENTRANCE FEED ROLLER Failure
8F2919
Page
273 of 326
Messages
Exposure Transport: Entrance
Failure
(Alarm sounds)
Description
This error occurs when the EXPOSURE ENTRANCE CLAMP SENSOR (S14) does not detect
successful position of the lower ROLLERS by the EXPOSURE ENTRANCE CLAMP MOTOR
(M10). This error can occur at multiple points in the EXPOSURE TRANSPORT process. The
error is cleared when power is cycled on the IMAGER.
Result of Error
The PRINTER cannot print films. The SPOOLER is able to receive and queue jobs but new
films will not be initiated. Films downstream of the subsystem will be completed. All other
films will be reprinted.
User Action
1
Restart the LASER IMAGER from the LOCAL PANEL.
2
If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1
De-energize then energize the LASER IMAGER.
LOCAL PANEL
LOG
Exposure Transport Entrance
Feed Roller Failure: Entrance
Roller Position sensor S14
indicates Exposure Transport
Entrance Motor M10 failure
Status Messages and Error Codes
DICOM
SEVERITY
FILM TRANS
1-Alert
ERR
Advertisement
Table of Contents
