Error 27-647: Start Of Page Sensor Failure - Kodak DryView 6800 Diagnostics Manual
Laser imager
Hide thumbs
Also See for DryView 6800:
- User manual (64 pages) ,
- Quick start manual (1 page) ,
- Specifications (6 pages)
Table of Contents
Advertisement
DIAGNOSTICS
30JUL07
Error 27-647: START OF PAGE SENSOR Failure
8F2919
Page
208 of 326
Messages
Optics: Internal Hardware
Failure
(Alarm sounds)
Description
This error occurs when the START OF PAGE SENSOR (S13) does not detect the normal
LASER on or off state during diagnostics. The error is cleared when power is cycled on the
IMAGER.
Result of Error
The PRINTER cannot print films. The SPOOLER is able to receive and queue jobs but new
films will not be initiated. Films downstream of the subsystem will be completed. All other
films will be reprinted.
User Action
1
Restart the LASER IMAGER from the LOCAL PANEL.
2
If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1
De-energize then energize the LASER IMAGER.
LOCAL PANEL
LOG
Start of Page Sensor (S13)
failed diagnostics
Status Messages and Error Codes
DICOM
SEVERITY
ELEC DOWN
0-Fatal
Advertisement
Table of Contents
