Error 21-139, 22-139, Or 23-139: Unable To Read Or Write To Rf Tag - Kodak DryView 6800 Diagnostics Manual

DIAGNOSTICS
30JUL07

Error 21-139, 22-139, or 23-139: Unable to Read or Write to RF TAG

8F2919
Page
138 of 326
Messages
xxxxx Supply: Unable to
Identify Film Cartridge
(Alarm sounds)
Description
Note
UPPER DRAWER (U) = 21. MIDDLE DRAWER (M) = 22, LOWER DRAWER (L) = 23.
The IMAGER attempts to read the RF TAG on the FILM CARTRIDGE up to 10 times after the
SUPPLY DRAWER is closed and at power up. If all attempts fail, the error is generated. This
error is also generated when the IMAGER fails to write to the RF TAG successfully. The error
is cleared when the SUPPLY DRAWER is closed (as indicated by the SUPPLY DRAWER
INTERLOCK).
Result of Error
The system cannot make a print from the SUPPLY DRAWER. The SPOOLER is able to
receive and queue jobs, and print from any other available SUPPLY DRAWER.
User Action
1 Install a new FILM CARTRIDGE.
2 If the error occurs again, call Service.
FE Action
Do the actions below in sequence. If an action provides a resolution, do not continue with the
other actions.
1 De-energize then energize the LASER IMAGER.
LOCAL PANEL LOG
xxxxx Supply: RF Tag Reader
failed to Read or Write RF
Tag data on film cartridge in
Status Messages and Error Codes
DICOM SEVERITY
BAD SUPPLY 1-Alert
MGZ