Kodak DryView 6800 Diagnostics Manual page 130

DIAGNOSTICS
30JUL07
FE Action
8F2919
Page
Do the actions below in sequence. If an action provides a resolution, do not continue with the
130 of 326
other actions.
1 De-energize then energize the LASER IMAGER.
2 Check the mechanical operation:
•
•
•
3 Do the following:
FILM CARTRIDGE
CONNECTORS and CABLES Seat all CONNECTORS.
BLINDMATE CONNECTOR
FILM OUT SENSOR - use the
SERVICE TOOL
CUPS ENGAGED SENSOR -
use the SERVICE TOOL
ROLLER DRIVE MOTOR
ROLLER DRIVE MOTOR
BELT
PICKUP DRIVE MOTOR
TENSION SPRINGS
Check:
Install a new FILM CARTRIDGE.
Adjust THE BLINDMATE. See the ADJUSTMENTS AND
REPLACEMENTS,
Install a new SENSOR. See the ADJUSTMENTS AND
REPLACEMENTS,
AY.
Install a new SENSOR. See the ADJUSTMENTS AND
REPLACEMENTS,
and PICKUP HOME (S1) - PICKUP
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
(M2) - PICKUP
Install a new BELTS. See the ADJUSTMENTS AND
REPLACEMENTS,
ROLLER OPEN/CLOSE - PICKUP
Install a new MOTOR. See the ADJUSTMENTS AND
REPLACEMENTS,
Install a new SPRING.
Status Messages and Error Codes
If an existing problem:
BLINDMATE BRACKET.
SENSOR, FILM OUT (S3) - PICKUP
SENSOR, CUPS ENGAGED (S2)
AY.
MOTOR, FEED ROLLER DRIVE
AY.
BELTS, ROLLER DRIVE and
AY.
MOTOR, DRIVE (M3) - PICKUP AY.