Initializing The Settings Of A Part - Roland MV-8800 Owner's Manual

Initializing the settings of a part

Here's how you can initialize all parameters of the current part.
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Use CURSOR [
The part number (the current part) will be highlighted.
3.
Press [MENU].
The MENU popup will appear.
4.
Select "Initialize Part" and press [F5](Select).
A message of "Initialize Part ##. Are you sure?" will appear. (## is a part number.)
F-button
[F1](No)
[F5](Yes)
●
You can't recover the parameters that have been initialized. If you want to keep the patch, be sure to save it
before initializing.
M-94
MV-8800 Owner's Manual
] [ ] to select the part number you want to initialize.
Explanation
Cancels without initializing.
Initializes the current part.