Explanation Of Screens Shown In The External Display - Roland MV-8800 Owner's Manual

Explanation of screens shown in the external display

Menu Bar
Launcher Block
Tracklist Area
● Transport Block
fig.transport-block2
Mixdown Mode
button
Sync Mode button
Current Time
Location
Current Time
Location
fig.transport-block1
Step Time
Marker button
Locator button
Step button
(Rewind/Forward)
Marker button
(Previous/Next)
Preview button
(To/From)
Event button
(Previous/Next)
Top button
Transport Block
Tools Area
Function Button Block
Explanation
This switches the mixdown mode. If you record while this is on, the current song will be mixed
down.
This displays the SYNC popup, where you can switch the synchronization state. This will be
lit if Sync Mode is set to anything other than Master.
This area indicates the current time location in "measures - beats - ticks." You can click a
numerical field and change the time.
This area indicates the current time location in "hours: minutes: seconds. frames."
Explanation
This indicates the range of movement that will occur when you press the Step buttons
(Rewind/Forward). You can click this area to see a list of the available movement ranges.
The MARKER popup will appear.
The LOCATOR popup will appear.
These buttons return or advance the current time location by the range specified in Step Time.
These buttons move the current time location to the next or previous recorded marker.
These buttons audition a several-second portion (specified by Preview Length) before or after
the current time location.
These buttons move the current time location to the next or previous recorded event.
Return to the start of the current song (0001-01-000).
Inspector Area
Ruler Area
Playlist Area
MV-8800 Owner's Manual
16
M-255