Importing from an audio CD
The options during import
By setting various options in the Import screen you can change the behavior of import.
● Applying emphasize while you import (Pre Emphasis)
1.
Make preparations for import as described in step 1–5 of "Importing from an audio CD" (p.
70) and then press [MENU].
The MENU popup will appear.
2.
Select "Import Options" and press [F5](Select).
The IMPORT OPTIONS popup (Screen Guide; p. 222) will appear.
3.
Turn the Pre Emphasis parameter On.
The pre emphasis function will be processed.
●
The amount of time required to execute the emphasis.
●
The high frequency range of the inputted sample will be boosted when Pre Emphasis is On.
4.
Press [F1](Close).
Proceed with import as described in step 6 of "Importing from an audio CD" (p. 70).
● Automatically divide the sample at silent regions during import
1.
Make preparations for import as described in step 1–5 of "Importing from an audio CD" (p.
70) and then press [MENU].
2.
Select "Import Options" and press [F5](Select).
The IMPORT OPTIONS popup (Screen Guide; p. 222) will appear.
3.
Turn the Auto Divide parameter On.
When a silent region is detected during import, the MV-8800 will automatically divide the sample.
4.
Set the Gap Time value.
Specifies the length of the silent regions that will be detected.
5.
Press [F5](Close).
Proceed with import as described in step 6 of "Importing from an audio CD" (p. 70).
●
A maximum of 96 samples can be divided.
M-72
MV-8800 Owner's Manual